Unmanaged Intelligent PoE Switch 8 PoE Port 2 Network Port
Industrial Switch
Product Description
CX-S804GF is an unmanaged intelligent PoE switch, with 8 Gigabit
PoE ports + 2 Gigabit uplink network ports + 2 Gigabit uplink SFPs,
of which 1-8 ports support IEEE 802.3af/at standard PoE power
supply, single The PoE power of the port is up to 30W, and the PoE
port can automatically detect and identify the powered device that
complies with the IEEE 802.3af/at standard and supply power to it
through the network cable. The non-POE device intelligently detects
that it does not provide power and only transmits data.
It can supply power to PoE terminal devices such as IP phones,
network cameras, wireless APs, video intercoms, and smart homes
through network cables. It is suitable for hotels, schools, factory
dormitories, and small and medium-sized enterprises to form
cost-effective networks.
PoE technology (Power over Ethernet) is Power over Ethernet
technology, which refers to providing DC power supply for some
IP-based terminals (such as IP phones, wireless access APs, network
cameras, etc.) while transmitting data signals. Technology, these
devices that receive DC power are called powered devices.
Product Features
- 8 Gigabit PoE ports + 2 Gigabit uplink ports + 2 Gigabit uplink
SFPs
- Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3ab
standards
- Ethernet port supports 10/100/1000M self-adaptation
- Flow control mode: Full duplex adopts IEEE 802.3x standard, half
duplex adopts Back pressure standard
- Use store-and-forward switching mechanism
- Comply with IEEE 802.3af/at PoE power supply standard
- Four-speed intelligent dial switch (switch function can be
customized):
VLAN: port isolation mode, 1-4 ports realize monitoring network
downlink ports are isolated from each other, and communicate with
uplink ports, effectively suppressing broadcast storms,Protect
intranet security.
PoE forced power supply: Ports 5~8 become forced power supply mode,
the power of a single port can reach 30W, and when the power of a
single port exceeds 30W, it will automatically switch off
The power supply of the port will be cut off, and the power supply
will be restored automatically after the port overload is removed.
AI watchdog: PoE watchdog mode, 1-8 power supply ports support PoE
watchdog function, when the port communication fails, the
corresponding port PoE It will restart automatically, reducing
on-site maintenance costs.
LED switch: 1-8 port LED lights indicate function switching, OFF is
the link/data indicator, ON is the PoE working status indicator.
- The PoE port supports the priority mechanism. When the remaining
power is insufficient, the power supply of the high-priority port
is given priority to avoid overloading the device..
- Ports 1~8 support AI recognition of long distances. When the cable
length is less than 100 meters, the default rate is 1000M. When the
cable length is greater than 100 meters, the rate of the
corresponding port is automatically reduced to 10M. PoE power
supply and data transmission distance can be extended to 250
meters.
Specification
| Technical Parameters |
| port characteristics |
| fixed port | 8*10/100/1000Base-T/TX PoE ports (Data/Power) 2*10/100/1000Base-T/TX Uplink RJ45 ports (Data) 2*100/1000Base-X uplink SFP fiber slot ports (Data) |
| Network port characteristics | 10/100Base–T(X) 10/100/1000 Base-T Automatic detection, full/half
duplex MDI/MDI-X adaptive |
| Network protocol | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T; IEEE802.3x |
| Backplane Bandwidth | 24 Gbps |
| packet forwarding rate | 17.86Mpps |
| packet forwarding cache | 4M |
| MAC address table | 4K |
| forwarding mode | store and forward |
| Twisted pair transmission | 10BASE-T: Cat5 UTP (≤250 meter) 100BASE-TX: Cat5 or later UTP (≤100 meter) 1000BASE-T: Cat5 or later UTP (≤100 meter) |
| LED indicator | Operation indicator: Sys (green); Network indicator: Link (green) |
| Special feature |
| Function switch (customizable) | SW1: VLAN |
| SW2: Force Output |
| SW3: Watchdog |
| SW4: LED |
| PoE and Power Characteristics |
| PoE power supply standard | 1-8 ports support IEEE802.3af/at standard PoE power supply |
| PoE power supply pin | 1/2(+), 3/6(-) |
| PoE maximum single port/average power | AT-30W / AF-15.4W |
| total power | 120W |
| Overall power consumption | Standby power consumption: < 5W; full load power consumption:
< 120W |
| certified product |
| Safety certification | CE,FCC,RoHS |
| Lightning Protection/Protection Level | Port Lightning Protection: 4kV 10/700us degree of protection: IP30 |
| Electrostatic Protection (ESD) | contact discharge: 8kV Air Discharge: 15kV |
| environmental standards |
| working environment | Working temperature: -20~55°C Storage temperature: -40~75°C Working humidity: 10%~90%, non-condensing Storage humidity: 5%~90%, non-condensing |
| Physical Specifications |
| Structural Dimensions (L*W*H mm) | 220*145*44mm |
| Net weight/Gross weight(Kg) | 0.95Kg/1.09Kg |
| power supply voltage | Power input voltage : AC 100~240V 50/60Hz Power output power: 52V/2.35A |
| Packing List | 1 POE switch 1 AC power cord 1 copy of product manual 1 copy of warranty card and certificate |
Details Images
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 1-3 working days, mass production time needs 3-5
weeks based on order quantity.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. Do your products meet our standards?
A: Yes, almost all our products have CE,ROHS,FCC,etc.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application. Secondly
We quote according to your requirements or our suggestions.Thirdly
customer confirms the samples and places deposit for formal order.
Then we arrange the production.
Q6. How do you ship the goods and how long does it take to arrive?
A: We usually ship by Ali-Logistics, DHL, UPS, Fedex, TNT, EMS, SF
Express or your designated forwarder. It usually takes 3-7 days to arrive. Airline and sea shipping also
optional.
Q7. What is your payment term?
We have Ali- pay, T/T, Visa,Western Union payment terms options, you can choose the one which
is convenient or effective for you !
Q8. Can you customized logo and packaging?
A: Yes, OEM/ODM are acceptable. Our design team will help you
design as your requirement.
